Specific
| Accessories | Carbon assembly paste, chain plate protector, touch-up paint |
|---|
| Bottom bracket | Shimano Hollowtech II |
|---|
| Brakes | Shimano Tiagra dual pivot mechanical caliper |
|---|
| Cassette | Shimano Tiagra,11-25T, 10-speed |
|---|
| Chain | Shimano Tiagra 10-speed |
|---|
| Crankset | Shimano Tiagra 48cm = 165mm 51cm = 170mm 54 - 56cm = 172.5mm 58 - 61cm = 175mm |
|---|
| Features | Internal Cable Routing: This indicates the use of flow-through internal cable routing. It reduces wind drag and prevents contaminants from entering and interfering with the function of brake or shifter cables.
InsideOut: InsideOut is a revolutionary internally optimized molding process that completely eliminates excess material, and therefore weight, inside the frame tubes and junctions. Placing polyurethane inserts inside the frame during the molding process—especially at the bottom bracket and head tube area—and then applying a precise amount of pressure and heat results in perfectly formed tubes, inside and out.
Control Taper: By using a ControlTaper head tube with 1-1/8” upper bearings and 1-1/2” lower bearings, Felt is able to significantly improve front-end stiffness and steering precision without adding weight to the frameset.
UHC Advanced: Ultra Hybrid Carbon Advanced refers to the lightweight, stiff and durable blend of carbon fiber material used in the performance frames bearing the UHC Advanced label. Because the high modulus materials have a higher fiber to resin ratio, these frames are typically about 20% lighter than UHC Performance frames while remaining equally strong and stiff. UHC Advanced offers the best combination of value and performance.
Modular Monocoque Construction: Modular Monocoque Construction is an advanced carbon fiber manufacturing technique that allows Felt to mold individual sections of the frameset and then join them together. The main advantage of MMC is that it allows each section to be optimized to meet the specific engineering demands of that particular section of the frame.
UHC Performance: UHC Performance is a T700-based blend of raw carbon fiber, which has a tensile strength that’s 7.9 times greater than 3/2/5 titanium and a stiffness rating that’s 3.34 times greater than 6061 aluminum. UHC Performance brings the unmatched performance of a Felt carbon fiber bike to more affordable pricing levels than ever before. |
|---|
| Fork type | Felt Race Road UHC Advanced carbon fiber monocoque construction, ControlTaper 1.125" - 1.5" carbon fiber steerer tube w/ integrated crown race, crown, blades & dropouts |
|---|
| Frame type | Felt Race Road UHC Performance carbon fiber, MMC w/ InsideOut construction, threaded BB, carbon fiber dropouts, replaceable rear derailleur hanger, electronic-compatible internal cable routing |
|---|
| Front derailleur | Shimano Tiagra braze-on |
|---|
| Headset | FSA NO.42 integrated, 1.125" - 1.5" sealed cartridge bearing w/ aluminum 15mm cone spacer, 2 x 10mm + 1 x 5mm PC headset spacers, Felt compression device, top cap & aluminum bolt |
|---|
| Hub front | Felt R4, sealed bearing, 24H |
|---|
| Hub rear | Felt R4, sealed bearing, 28H, 10-speed |
|---|
| Rear derailleur | Shimano Tiagra short cage |
|---|
| Recommended for | Club Ride |
|---|
| Rims type | MAVIC CXP-22 |
|---|
| Saddle | Felt SuperLite Road |
|---|
| Shifters | Shimano Tiagra STI |
|---|
| Spokes | 2.0mm stainless steel |
|---|
| Stem | Felt SuperLite, +/-7° rise, Ø31.8mm 48cm = 80mm 51cm = 90mm 54 - 56cm = 100mm 58cm = 110mm 61cm = 120mm |
|---|
| Tires | Vittoria Rubino Pro Tech, 700 x 23c |
|---|
