Specific
| Bottom bracket | SRAM RED Ceramic BB30 |
|---|
| Brake rotor | Avid BB7 disc w/ ASHIMA 6 bolt 410 stainless steel rotor, front=160mm, rear=140mm |
|---|
| Brakes | Avid BB7 disc |
|---|
| Cassette | SRAM XG1090, 11-26T |
|---|
| Chain | SRAM RED 10-speed |
|---|
| Crankset | SRAM RED BB30, 46/36T; 47cm=165mm, 50cm=170mm, 53cm=172.5mm, 55cm-60cm=175mm |
|---|
| Features | Inside Out
InsideOut is a revolutionary internally optimized molding process that completely eliminates excess material, and therefore weight, inside the frame tubes and junctions. Placing polyurethane inserts inside the frame during the molding process—especially at the bottom bracket and head tube area—and then applying a precise amount of pressure and heat results in perfectly formed tubes, inside and out.
Control Taper
By using a Control Taper head tube with 1-1/8” upper bearings and 1-1/2” lower bearings, Felt is able to significantly improve front-end stiffness and steering precision without adding weight to the frameset.
Modular Monocoque
Modular Monocoque Construction (MMC) is an advanced carbon fiber manufacturing technique that allows Felt to mold individual sections of the frameset and then join them together. The main advantage of MMC is that it allows each section to be optimized to meet the specific engineering demands of that particular section of the frame.
UHC Advanced
Ultra Hybrid Carbon Advanced refers to the lightweight, stiff and durable blend of carbon fiber material used in the performance frames bearing the UHC Advanced label. Because the high modulus materials have a higher fiber to resin ratio, these frames are typically about 20% lighter than UHC Performance frames while remaining equally strong stiff. UHC Advanced offers the best combination of value and performance.
|
|---|
| Fork type | 3T LUTEUS fork; 100% Carbon Fiber Taper Carbon Fiber 1.125" - 1.5" steerer tube, crown & blades w/ aluminum faced post mount disc tabs and dropouts |
|---|
| Frame type | Felt Cyclocross UHC Advanced MMC Carbon Fiber Frame w/ 1.5KP Weave, shoulder friendly top tube, InsideOut internal molding process, Carbon BB30 Shell, internal electric or external mechanical cable routing, Carbon Fiber dropouts w/IS mount disc tabs & 707 |
|---|
| Front derailleur | SRAM RED Ø31.8mm w/chain watcher |
|---|
| Headset | FSA Orbit NO.42 1.125" - 1.5" Integrated, w/ Carbon Fiber 15mm cone spacer, 1 x 20mm Carbon Fiber headset spacer, 1 x 5mm PC headset spacer, 3T bonded in compression device w/ARX Carbon Fiber top cap & aluminum bolt |
|---|
| Hub front | Mavic Crossmax SLR 29 6 bolt IS |
|---|
| Hub rear | Mavic Crossmax SLR 29 6 bolt IS |
|---|
| Rear derailleur | SRAM RED |
|---|
| Rims type | Mavic Crossmax SLR 29 |
|---|
| Saddle | Prologo NAGO EVO X10, Carbon Fiber injected base w/EV2 active density foam padding & titanium rails |
|---|
| Shifters | SRAM RED DoubleTap |
|---|
| Spokes | Mavic Crossmax SLR bladed Zicral |
|---|
| Stem | 3T ARX Team 7075 T6 aluminum w/Titanium bolts, +/-6° rise, Ø31.8mm bar clamp,47cm=70mm, 50cm=80mm, 53cm=90mm, 55cm=100mm, 57cm=110mm, 60cm=120mm. |
|---|
| Tires | Vittoria Cross XG Pro TNT 700c x 32c, 150 tpi, Tubeless compatible |
|---|
