Specific
| Brake levers | Formula T1S |
|---|
| Brake rotor | Formula, 203/180mm |
|---|
| Brakes | FORMULA T1S, hydraulic disc |
|---|
| Crankset | e*thirteen LG1 36T, 165mm, Oversized Alloy Axle |
|---|
| Features | Advanced Hydroforming: The new STEREO, FRITZZ and HANZZ models are built using Advanced Hydroforming. Conventional hydroforming processes cannot achieve these custom shapes and technical advantages. As this manufacturing method reduces the number of welds, the weight is reduced while durability is increased.
Aluminium Ultralite: Very high tensile strength heat-treated 7005 aluminium alloy is developed for the highest requirements. It is very stiff, fatigue resistant, corrosion resistant and has high elongation. Our Superlite tubes are triple butted, giving very light tubesets with a high level of stiffness.
Fox Customized Setup: Sophisticated suspension kinematics are only able to work correctly if the associated shock is properly tuned. We researched and found a specific shock setup in cooperation with Fox Racing Shox, using extensive testing for almost every CUBE full-suspension model.
FSP4Link: The key requirement is for continuously active and fully usable travel, with the rear triangle unaffected by pedalling or especially braking forces. There are a number of ways of achieving this – CUBE favours a four bar design with a chainstay pivot. Here, one of the pivots is located between the dropout and the chainstay, ensuring that braking does not have a negative effect on the movement of the rear wheel. By carefully positioning the remaining pivots, we obtain the finest riding qualities for our full suspension bikes both uphill and downhill. This fact is proven by many top test results in leading magazines over the last few years.
Triple Linkage Kinematics: With our patented Triple Linkage Kinematics (TLK), we can control the rate curve of the rear suspension as we wish. On long travel damping systems with short leverage it is difficult to control the rate curve and still use the full potential of the rear shock. With TLK we have the control to do this. The system works with three links. Two of the links control the curves of the shock pivot points via the third link. By adjusting the positioning and length of the links we have fine control of the curve of the shock compression to maximise the performance of the bike chassis.
Wet Paint Surface: On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.
X12 Through Axle: In this system, a cone is used to form a play-free connection. It is only necessary to tighten the axle from one side. The position of the wheel is done by an insert in the right-hand dropout which is secured by a bolt. The main advantages of the Syntace system are quick and simple changing of the wheel, reliable position of the brake disc and higher stiffness of the rear of the bike. This allows the assembly to be made lighter than a conventional through-axle. |
|---|
| Fork type | Fox 40 R O/B, 110x20mm Axle, 200mm |
|---|
| Frame type | HPA Ultralight, Advanced Hydroform, TLK, FSP 4-Link, ISCG mount, 150mm X12 |
|---|
| Headset | Cane Creek 40.ZS49 | 40.EC49\30, top zero-stack 1 1/2" x 1 1/8", bottom 1 1/2" external cup w/ reducer cone |
|---|
| Hub front | Shimano ZEE HB-M640 Centerlock, 110x20mm |
|---|
| Hub rear | Shimano ZEE FH-M645 Centerlock Disc, 150x12mm |
|---|
| Rear derailleur | Shimano ZEE RD-M640-SS, Shadow Plus, 10-speed |
|---|
| Recommended for | Downhill |
|---|
| Rims type | Alex Supra30 Disc 32H, 26" |
|---|
| Saddle | SDG Fly RL |
|---|
| Shifter | Shimano ZEE SL-M640 10-speed right |
|---|
| Shock type | Fox DHX RC2, 267x89mm, Rebound, Low-speed Compression and Bottom Out adjustable |
|---|
| Stem | Easton Bolt-On Direct 45/50mm, Oversized 35.0mm clamp |
|---|
| Tires | Front: Schwalbe Magic Mary, Super Gravity, VertStar 26 x 2.35, Rear: Schwalbe Hans Dampf, Super Gravity, PaceStar 26 x 2.35 |
|---|
