Specific
| Brake levers | Shimano Deore XT |
|---|
| Brake rotor | Shimano, 180/180mm |
|---|
| Brakes | Shimano Deore XT M785, hydraulic disc |
|---|
| Crankset | Miranda CUBE Hybrid Crank Gamma, 15T |
|---|
| Features | -Engine: BOSCH Drive Unit Performance Cruise (250 Watt)
-Battery: BOSCH Power Pack 400 Performance
-Display: BOSCH Intuvia Performance
High Performance Aluminium: For our high end bikes we use High Performance 7005 Aluminium alloy which has a very low density combined with high strength due to the alloy elements and the hardening heat treatment. By triple butting or even quadruple butting (as in the REACTION, HANZZ and AERIUM models) to give different wall thicknesses in one tube, aluminium tubes are reinforced where required and made lighter where possible. In this way, we succeed in getting material where its needed most. In addition we use special tube shapes, manufactured with hydroforming technology to better cope with directional forces. The low density and high strength as well as the butting and the hydroforming technology enable us to make high performance frames with an ultimate level of stiffness.
Fox Customized Setup: Sophisticated suspension kinematics are only able to work correctly if the associated shock is properly tuned. We researched and found a specific shock setup in cooperation with Fox Racing Shox, using extensive testing for almost every CUBE full-suspension model.
FSP4Link: The key requirement is for continuously active and fully usable travel, with the rear triangle unaffected by pedalling or especially braking forces. There are a number of ways of achieving this – CUBE favours a four bar design with a chainstay pivot. Here, one of the pivots is located between the dropout and the chainstay, ensuring that braking does not have a negative effect on the movement of the rear wheel. By carefully positioning the remaining pivots, we obtain the finest riding qualities for our full suspension bikes both uphill and downhill. This fact is proven by many top test results in leading magazines over the last few years.
Wet Paint Surface: On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.
X12 Through Axle: In this system, a cone is used to form a play-free connection. It is only necessary to tighten the axle from one side. The position of the wheel is done by an insert in the right-hand dropout which is secured by a bolt. The main advantages of the Syntace system are quick and simple changing of the wheel, reliable position of the brake disc and higher stiffness of the rear of the bike. This allows the assembly to be made lighter than a conventional through-axle.
Adaptable X12 Hanger: We optimized our new dropout design based on the Syntace X12 through-axle system, enlarging the area of the frame where the hanger is mounted. We can now fit the longer Direct Mount hangers. Shifting precision and stiffness is therefore improved. With the new design it's also possible to swap the whole contact area of the axle with the hanger should the system be worn out.
Efficient Trail Control: Our Efficient Trail Control series works so that everyone can have more fun on the trail. With 27.5 and 29er wheel options our frames cover the widest range of riding on every terrain you can imagine. The low leverage ratio and linear rate curve makes the bike very sensitive, avoids bobbing and offers full usable travel all the time. Steep seat tube angles and slack head tube angles make these dream machines ready for action on the descent where you can use the full amount of travel to be on the safe side.
Trail Motion Rocker: The Trail Motion Rocker features optimized leverage ratios for every bike and intended use, giving fast reacting yet stable suspension in every situation. The computer-designed one piece rocker construction gives maximum stiffness for the best suspension performance while still being extremely lightweight.
Agile Ride Geometry: We ran innumerable tests to develop the Agile Ride Geometry in our series of big wheel bikes. We also added the 27.5in wheel size to the very well received portfolio. Three important details lead to the very agile character. Increased fork offsets let us achieve the same trail as our 26in bikes without having to steepen the head angle, thus maintaining generous toe clearance to the front wheel. Secondly we shortened the chain stays without compromising the seat angle. We invented a patented construction to mount the front derailleur to give us more tyre clearance while keeping a conventional seat angle, leading to a perfect riding position for every rider size. Last but not least we kept the BB height the same as on our 26in bikes. These measures lead to a natural riding position. Every mountain biker will feel immediately at home on a CUBE 29er or 27.5.
Optimal Drive Position: The “engine” is the critical part of an Ebike because of its weight and its junction to the regular drivetrain. These factors present a real challenge for the frame design. This is why CUBE developed an innovative new frame construction for the new Ebike generation: simultaneously being the cradle for the electric motor, the pivot for the rear link and the seat of the shock eyelet, the very complex area of the bottom bracket is made of two forged halves. The groove in the front section together with the specially formed down tube is home for the power pack which in this way has a very low position in the frame triangle. The positive outcome is an extremely low center of gravity supporting an agile riding characteristic while achieving a super rigid bottom bracket area.
Advanced Hydroforming: The new STEREO, FRITZZ and HANZZ models are built using Advanced Hydroforming. Conventional hydroforming processes cannot achieve these custom shapes and technical advantages. As this manufacturing method reduces the number of welds, the weight is reduced while durability is increased. |
|---|
| Fork type | Fox 34 Float 27.5 CTD O/C, tapered, 15QR, 140mm |
|---|
| Frame type | HPA Advanced Hydroforming, Optimal Drive Position, ARG 27.5, ETC FSP 4-Link,Triple Butted, Adaptable X12 Hanger |
|---|
| Headset | FSA Orbit Z-t semi-integrated |
|---|
| Hub front | DT SWISS, 15QR |
|---|
| Hub rear | DT Swiss 142/12mm |
|---|
| Rear derailleur | Shimano XT RD-M786 GS, Shadow+, 10-Speed |
|---|
| Recommended for | Mountain |
|---|
| Rims type | DT Swiss CSW AM 2.7, 27.5" |
|---|
| Saddle | Selle Italia X1 Trail |
|---|
| Shifter | Shimano XT SL-M780 I-Spec, Rapidfire-Plus 10-Speed |
|---|
| Shock type | Fox Float CTD BoostValve, 200x57mm, Trail and Climb mode option, Rebound, LV air canister |
|---|
| Spokes | DT SWISS |
|---|
| Stem | Easton EA70, 31.8mm |
|---|
| Tires | Schwalbe Hans Dampf 27.5 x 2.35 |
|---|
